China Universal Double Cardan Shaft for Heavy Equipment with Great quality

Solution Description

Telescopic flange prolonged cardan shaft Coupling(SWP-A)

Merchandise Description

SWP partition profile bearing the cross shaft common coupling products: substitution of bearings for, SWP sort cardan layout bearing break up shaft bolt, suitable for hoisting and conveying machinery and other large machinery, connecting 2 distinct axis transmission shaft, axis angle of A~F kind not more than ten levels, the G variety is not greater than 5 degrees.

Product Parameters

♦Basic Parameter And Principal Dimension

Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch duration S mm	Measurement(mm)										Rotary inertia kg·m²		Mass kg
Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch duration S mm	Lmin	D1 js11	D2 H7	D3	E	E1	B×h	h1	L1	n-d	Lmin	Increase a hundred	Lmin	Increase one hundred
SWP160A	one hundred sixty	16	8	≤10	50	660	140	ninety five	114	fifteen	4	20×12	six	eighty five	6-13	.thirteen	.0059	47	2.1
SWP180A	a hundred and eighty	twenty	ten	≤10	sixty	752	a hundred and fifty five	one hundred and five	121	15	4	24×14	7	95	6-fifteen	.22	.0072	60	2.three
SWP200A	two hundred	31.five	sixteen	≤10	70	823	175	125	17	seventeen	5	28×16	eight	a hundred and ten	eight-15	.37	.0114	eighty one	three.four
SWP225A	225	40	20	≤10	76	933	196	a hundred thirty five	152	twenty	5	32×18	nine	one hundred thirty	8-17	.63	.5710	109	6.6
SWP250A	250	sixty three	31.5	≤10	80	978	218	150	168	25	five	40×25	12.5	one hundred thirty five	eight-19	1.02	.0407	147	seven.three
SWP285A	285	ninety	45	≤10	100	1133	245	170	194	27	7	40×30	fifteen	one hundred fifty	eight-21	two.seventeen	.0702	241	nine.four
SWP315A	315	one hundred forty	sixty three	≤10	110	1250	280	185	219	32	7	40×30	fifteen	a hundred and seventy	ten-23	three.86	.1144	322	12.
SWP350A	350	a hundred and eighty	90	≤10	120	1380	310	210	245	35	eight	50×32	sixteen	185	10-23	6.66	.1663	428	thirteen.6
SWP390A	390	250	112	≤10	a hundred and twenty	1495	345	235	273	40	8	70×36	eighteen	205	10-twenty five	eleven.fifty three	.2695	566	18.
SWP435A	435	355	one hundred sixty	≤10	one hundred fifty	1710	385	255	299	forty two	ten	80×40	twenty	235	sixteen-28	21.81	.3645	932	twenty.
SWP480A	480	450	224	≤10	a hundred and seventy	1910	425	275	351	47	twelve	90×45	22.5	265	16-31	38.04	.7571	1294	28.
SWP550A	550	710	315	≤10	one hundred ninety	2135	492	320	402	50	twelve	100×45	22.five	290	16-31	sixty one.28	1.1842	1744	35.7
SWP600A	600	one thousand	500	≤10	210	3580	544	380	450	55	15	90×55	27.5	360	22-34	ninety eight.63	1.7159	2330	40.five
SWP640A	640	1250	630	≤10	230	2685	575	385	480	60	15	100×60	30	385	18-38	167.sixty seven	two.3080	3153	48.3

·Note:L is the size of installation,such as the benefit of S/Z shrinkage.

Thorough Pictures

Company Profile

HangZhou CZPT Equipment Producing Co., Ltd. is a higher-tech company specializing in the design and style and manufacture of various kinds of coupling. There are 86 workers in our firm, including 2 senior engineers and no less than twenty mechanical style and manufacture, heat remedy, welding and other experts.

Advanced and affordable approach, total detection means. We firm actively introduce international advanced technological innovation and products, on the basis of the situation, we make entire use of the edge and do far more investigation and innovation. Rigorous to large high quality and function strictly in accordance with the ISO9000 quality certification technique standard manner.

Our company provides different sorts of products. Large quality and realistic value. We stick to the principle of “high quality very first, provider first, continuous improvement and innovation to satisfy the consumers” for the administration and “zero defect, zero complaints” as the top quality aim.

After Revenue Provider

one.Style Solutions
Our design and style group has expertise in cardan shaft relating to merchandise style and development. If you have any demands for your new solution or desire to make even more enhancements, we are here to provide our support.

two.Merchandise Services
uncooked supplies → Chopping → Forging →Rough machining →Shot blasting →Heat treatment method →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

three.Samples Procedure
We could produce the sample according to your prerequisite and amend the sample continually to meet up with your want.

four.Analysis & Improvement
We normally analysis the new requirements of the market and produce the new product when there is new vehicles in the market.

five.Top quality Management
Every step should be special take a look at by Expert Employees in accordance to the standard of ISO9001 and TS16949.

FAQ

Q 1: Are you buying and selling company or manufacturer?
A: We are a professional maker specializing in producing
numerous collection of couplings.

Q 2:Can you do OEM?
Of course, we can. We can do OEM & ODM for all the clients with tailored artworks of PDF or AI format.

Q 3:How long is your shipping time?
Normally it is 20-thirty times if the merchandise are not in inventory. It is according to amount.

Q 4: Do you supply samples ? Is it cost-free or further ?
Indeed, we could offer the sample but not for totally free.Really we have a extremely great value basic principle, when you make the bulk buy then cost of sample will be deducted.

Q 5: How prolonged is your guarantee?
A: Our Guarantee is 12 thirty day period underneath normal circumstance.

Q 6: What is the MOQ?
A:Typically our MOQ is 1pcs.

Q 7: Do you have inspection processes for coupling ?
A:one hundred% self-inspection ahead of packing.

Q 8: Can I have a check out to your manufacturing unit ahead of the purchase?
A: Positive,welcome to visit our manufacturing unit.

Q 9: What is actually your payment?
A:1) T/T. 2) L/C

♦Contact Us
Net: huadingcoupling
Add: No.1 HangZhou Street,Chengnan park,HangZhou City,ZheJiang Province,China

US $74.85-149,700
/ Piece
| 1 Piece

(Min. Order)

###

Standard Or Nonstandard:	Standard
Shaft Hole:	as Your Requirement
Torque:	as Your Requirement
Bore Diameter:	as Your Requirement
Speed:	as Your Requirement
Structure:	Flexible

###

Customization:	Available \| Customized Request

###

Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Size(mm)										Rotary inertia kg·m²		Mass kg
Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Lmin	D1 js11	D2 H7	D3	E	E1	B×h	h1	L1	n-d	Lmin	Increase 100	Lmin	Increase 100
SWP160A	160	16	8	≤10	50	660	140	95	114	15	4	20×12	6	85	6-13	0.13	0.0059	47	2.1
SWP180A	180	20	10	≤10	60	752	155	105	121	15	4	24×14	7	95	6-15	0.22	0.0072	60	2.3
SWP200A	200	31.5	16	≤10	70	823	175	125	17	17	5	28×16	8	110	8-15	0.37	0.0114	81	3.4
SWP225A	225	40	20	≤10	76	933	196	135	152	20	5	32×18	9	130	8-17	0.63	0.0290	109	6.6
SWP250A	250	63	31.5	≤10	80	978	218	150	168	25	5	40×25	12.5	135	8-19	1.02	0.0407	147	7.3
SWP285A	285	90	45	≤10	100	1133	245	170	194	27	7	40×30	15	150	8-21	2.17	0.0702	241	9.4
SWP315A	315	140	63	≤10	110	1250	280	185	219	32	7	40×30	15	170	10-23	3.86	0.1144	322	12.0
SWP350A	350	180	90	≤10	120	1380	310	210	245	35	8	50×32	16	185	10-23	6.66	0.1663	428	13.6
SWP390A	390	250	112	≤10	120	1495	345	235	273	40	8	70×36	18	205	10-25	11.53	0.2695	566	18.0
SWP435A	435	355	160	≤10	150	1710	385	255	299	42	10	80×40	20	235	16-28	21.81	0.3645	932	20.0
SWP480A	480	450	224	≤10	170	1910	425	275	351	47	12	90×45	22.5	265	16-31	38.04	0.7028	1294	28.0
SWP550A	550	710	315	≤10	190	2135	492	320	402	50	12	100×45	22.5	290	16-31	61.28	1.1842	1744	35.7
SWP600A	600	1000	500	≤10	210	3580	544	380	450	55	15	90×55	27.5	360	22-34	98.63	1.7159	2330	40.5
SWP640A	640	1250	630	≤10	230	2685	575	385	480	60	15	100×60	30	385	18-38	167.67	2.3080	3153	48.3

US $74.85-149,700
/ Piece
| 1 Piece

(Min. Order)

###

Standard Or Nonstandard:	Standard
Shaft Hole:	as Your Requirement
Torque:	as Your Requirement
Bore Diameter:	as Your Requirement
Speed:	as Your Requirement
Structure:	Flexible

###

Customization:	Available \| Customized Request

###

Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Size(mm)										Rotary inertia kg·m²		Mass kg
Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Lmin	D1 js11	D2 H7	D3	E	E1	B×h	h1	L1	n-d	Lmin	Increase 100	Lmin	Increase 100
SWP160A	160	16	8	≤10	50	660	140	95	114	15	4	20×12	6	85	6-13	0.13	0.0059	47	2.1
SWP180A	180	20	10	≤10	60	752	155	105	121	15	4	24×14	7	95	6-15	0.22	0.0072	60	2.3
SWP200A	200	31.5	16	≤10	70	823	175	125	17	17	5	28×16	8	110	8-15	0.37	0.0114	81	3.4
SWP225A	225	40	20	≤10	76	933	196	135	152	20	5	32×18	9	130	8-17	0.63	0.0290	109	6.6
SWP250A	250	63	31.5	≤10	80	978	218	150	168	25	5	40×25	12.5	135	8-19	1.02	0.0407	147	7.3
SWP285A	285	90	45	≤10	100	1133	245	170	194	27	7	40×30	15	150	8-21	2.17	0.0702	241	9.4
SWP315A	315	140	63	≤10	110	1250	280	185	219	32	7	40×30	15	170	10-23	3.86	0.1144	322	12.0
SWP350A	350	180	90	≤10	120	1380	310	210	245	35	8	50×32	16	185	10-23	6.66	0.1663	428	13.6
SWP390A	390	250	112	≤10	120	1495	345	235	273	40	8	70×36	18	205	10-25	11.53	0.2695	566	18.0
SWP435A	435	355	160	≤10	150	1710	385	255	299	42	10	80×40	20	235	16-28	21.81	0.3645	932	20.0
SWP480A	480	450	224	≤10	170	1910	425	275	351	47	12	90×45	22.5	265	16-31	38.04	0.7028	1294	28.0
SWP550A	550	710	315	≤10	190	2135	492	320	402	50	12	100×45	22.5	290	16-31	61.28	1.1842	1744	35.7
SWP600A	600	1000	500	≤10	210	3580	544	380	450	55	15	90×55	27.5	360	22-34	98.63	1.7159	2330	40.5
SWP640A	640	1250	630	≤10	230	2685	575	385	480	60	15	100×60	30	385	18-38	167.67	2.3080	3153	48.3

Choosing the Right PTO for Your Machine

There are many types of PTOs, and you may be wondering which one is the best choice for your machine. In this article, you’ll learn about Splined PTOs, Reverse PTOs, and Independent PTOs. Choosing the right PTO for your needs will allow you to operate your machine more efficiently.

LPTO

LPTOs can be dangerous for operators. They should stay at a safe distance from them to avoid getting entangled in the rotating shaft. If an operator gets caught, he or she could sustain severe injuries or even death. Safety precautions include wearing clothing that does not cling to the shaft.
There are many types of PTOs. Some of them support high power applications. These models have different shafts with varying spline configurations. Type 3 shafts have 20 splines, while Type 2 shafts have just 10. Type 3 and Type 2 shafts are referred to as large 1000 and small 1000 respectively by farmers.
The power that drives the PTO shaft comes from the gearbox through the countershaft. Standardizing the PTO speed helps to design equipment around the given speed. For example, a threshing machine is supposed to run at a specific peripheral velocity of the threshing cylinder, so pulley arrangements are usually designed with that speed in mind.
Because the PTO shaft is often low to the ground, it is easier to handle it from a kneeling position. Using a good surface to place the implement on will help you align the splines properly. To make this process easier, use a floor mat, a carpet, or a sturdy piece of cardboard. Once you have positioned the shaft on the PTO, press the locking pin button. If the PTO shaft is stuck, jiggling the implement a bit will help it slide into position.

Reverse PTO

There are several different ways to reverse the PTO shaft. Some older Massey Ferguson style tractors are designed to reverse the PTO shaft by turning it backward. This feature is useful for raising upright silo unloaders. The first method involves driving backward with the rear wheel jacked up and rotating while the rear wheel spins. This method is also useful for reversing a baler or unplugging a baler.
Another option is to install a reverse PTO adapter. These adapters are available for all types of PTOs. A reverse PTO is an excellent choice for any implement that can get stuck when rotating in one direction. However, it should only be used when it is absolutely necessary. The reverse PTO should not be rotated too far backward or for too long.
There are also different types of PTO shafts. Some transfer energy faster than others. That is why a large tractor’s PTO will transfer energy faster than a small tractor’s. Furthermore, independent PTOs don’t require a parking break like transmission PTOs do. There is also a difference between metric and domestic PTO shafts.
In farming, the reverse PTO is used when the farm machinery gets stuck or needs to be reversed. It also makes it possible to use the tractor to turn in the opposite direction. A PTO is a mechanical gearbox that transfers energy from the tractor’s engine to other implements. It can also supply power in the form of rotating pumps.

Splined PTO

The splined PTO shaft consists of six equal-sized splines that are spaced apart by grooves. The splines are angled to the axis of rotation of the PTO shaft. When the splines and the grooves meet, they align the screw end portion.
A splined PTO shaft can be retrofitted to most size 6 PTO shafts. It can also be used as a replacement for a worn out or damaged PTO shaft. This type of PTO shaft is recommended for tractors that require a quick and easy install.
Splined PTO shafts can be used for different types of agricultural equipment. They are compatible with standard and Weasler yokes. They can be cut to size and are available in North American and Metric series. They also come in an Italian Metric series. These shafts are easy to install and remove with a simple key.
A splined PTO shaft is essential for facilitating the interconnection of different components. A power take off (PTO) shaft tool engages the splined PTO shaft and turns it in order to align it with the input shaft of a cooperating structure. This tool is used to connect the PTO shaft to a tractor. This can also be used on a truck, trailer, or any other powered vehicle.
A wrench 40 is also useful for securing a PTO shaft. It enables the wrench to rotate the P.T.O. shaft approximately 30 degrees. The wrench’s leg 46 engages the shaft on the opposite side of the PTO shaft 16. Once the wrench is tightened, the tool can rotate the PTO shaft to make it align with the input shaft 16.

Independent PTO

Independent PTO shafts can be mechanical or hydraulic. The mechanical type has a separate on/off selector and control lever, whereas hydraulic PTOs have just one. The mechanical version is preferred for tractors that need to operate at lower speeds and for applications such as baling and tilling. The hydraulic version reduces noise and vibration.
Another advantage of an independent PTO is that it is easy to engage. Instead of engaging a clutch, you simply shift the PTO selector lever away from ‘OFF’ and flip the PTO switch to “ON.” This lever is usually located on the right hand side of the operator’s seat.
The ISO 500 standard provides specifications for independent PTO shafts. This specification lays out the size of the shaft, number of splines and the location of the PTO. In addition, it specifies the maximum RPM and shaft diameter for a PTO. The original ISO 500-3 specification calls for 540 revolutions per minute for shafts with six splines.
Another benefit of an independent PTO is its ability to be engaged or disengaged without using the transmission clutch. The lever can be pressed halfway or fully to engage an independent PTO. The independent PTO also allows you to stop the tractor while it is in motion. Independent PTOs are available in hydrostatic or mechanical configurations, and are particularly popular with hydrostatic drives.

LPTO shaft guard

An LPTO shaft guard prevents accidental rotational collisions by covering the shaft of a PTO. A PTO shaft is a moving part that can entrap a person’s legs, arms, and clothing. In a pinch, a person could become entangled in the shaft and suffer a serious injury. A PTO shaft guard is a great way to protect yourself against these dangerous incidents.
PTO mishaps can cause severe injuries and even fatalities. To prevent this, equipment manufacturers have made strides in improving the design and construction of their PTO drive shafts. A PTO shaft guard will protect the drive shaft from entanglement and tearing. Proper installation and maintenance of a PTO shaft guard can help protect the tractor, PTO, and other machinery.
Tractor PTO shaft guards are made from durable plastics and can be installed easily. They keep all the parts of the tractor in place and prevent accidents during operation. These parts are vital components for many farm equipments. A 540 RPM shaft can pull a person from a distance of five feet. A PTO shaft guard will prevent this from happening by keeping clothing from becoming entangled in the shaft.
Another important component of a PTO system is the master shield, which covers the PTO stub and the input driveline shaft of an implement. The master shield protects both the tractor PTO stub and the connection end of the input driveline shaft. It extends over the PTO stub on three sides. Many people never replace their master shields because they are too expensive.

Safety of handling a pto shaft

Handling a PTO shaft safely is a vital component of tractor safety. Safety shields must be properly fastened to the shaft to prevent any accidents. The shield should also be inspected and maintained regularly. Otherwise, foreign materials, including clothing, can enter the shaft’s bearings. It is also important to walk around the rotating shaft whenever possible.
Power takeoff shafts are used to transfer mechanical power from farm tractors to implements. However, improper handling of these devices can lead to severe injuries, including amputation and multiple fractures. Spinal injuries are also common, especially if an individual is rotated around the shaft.
Operator awareness is key to avoiding PTO entanglement. Performing repairs while a machine is in operation or wearing loose, frayed clothing may lead to injury. It is also important to read the manufacturer’s instructions before operating a PTO. Lastly, it is important to never operate a PTO while the engine is running.
PTO shafts should be protected by ‘U’ or ‘O’ guards on the tractor and the attached implement. It is also important to use a PTO stand. As with any mechanical part, handling a PTO shaft requires care. Always ensure that the tractor is off before working and remove the key before working on it. Also, it is important to avoid stepping on the drive line or going under it. Make sure you wear protective clothing and shoes. Avoid wearing clothes that have laces as they could become entangled in the shaft and cause injury.
The connection to the PTO shaft should be close to the ground. If it is not, kneel on a flat surface. A piece of carpet, automobile floor-mat or cardboard can work well. Then, align the splines on the PTO shaft. To do this, press the locking pin button, then pull the ball-lock collar back, and then push the shaft onto the PTO.

editor by czh 2022-12-14

Tags: cardan shaft | double shaft | shaft | universal shaft