China Double Flange Auto Transmission Cardan Shaft pto shaft parts

Item Description

Telescopic brief Cardan shaft Coupling(SWP-B)

SWP break up bearing housing cross shaft common coupling is suited for machinery, lifting, transportation equipment, and other large machinery. Connecting 2 axes whose axes are not on the identical straight line. The rotation diameter is one hundred sixty-640mm. The nominal torque Tn=16-1250Kn·m, axis angle A-F type β≤25°.G type≤5°. SWP common joint coupling is linked to the other mechanical parts by substantial-toughness bolts and self-locking nuts. The torque is transmitted via the flange end crucial and the friction among the flange.

♦SWP B Type Cardan Shaft Simple Parameter And Major Dimension(JB/T3241-1991)

Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch size S mm	Measurement(mm)										Rotary inertia kg·m^two	Mass kg
Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch size S mm	L	D1 js11	D2 H7	D3	E	E1	B×h	h1	L1	n-d	Rotary inertia kg·m^two	Mass kg
SWP160B	a hundred and sixty	sixteen	eight	≤10	fifty	585	140	ninety five	114	fifteen	4	20×12	6	eighty five	6-thirteen	.fourteen	forty four
SWP180B	180	twenty	10	≤10	60	640	one hundred fifty five	a hundred and five	121	fifteen	4	24×14	7	95	six-fifteen	.23	fifty four
SWP200B	two hundred	31.5	sixteen	≤10	70	730	175	one hundred twenty five	seventeen	seventeen	5	28×16	8	one hundred ten	8-15	.36	75
SWP225B	225	40	20	≤10	seventy six	830	196	one hundred thirty five	152	20	five	32×18	9	a hundred thirty	eight-17	.61	108
SWP250B	250	63	31.5	≤10	80	860	218	a hundred and fifty	168	twenty five	five	40×25	12.five	a hundred thirty five	8-19	.ninety eight	138
SWP285B	285	ninety	45	≤10	one hundred	a thousand	245	one hundred seventy	194	27	7	40×30	15	150	8-21	2.12	229
SWP315B	315	a hundred and forty	63	≤10	110	1120	280	185	219	32	seven	40×30	fifteen	one hundred seventy	10-23	3.eighty	309
SWP350B	350	one hundred eighty	90	≤10	one hundred twenty	1230	310	210	245	35	eight	50×32	16	185	10-23	6.60	408
SWP390B	390	250	112	≤10	120	1310	345	235	273	40	8	70×36	18	205	10-twenty five	10.fifty	539
SWP435B	435	355	160	≤10	a hundred and fifty	1555	385	255	299	forty two	10	80×40	twenty	235	16-28	22.39	903
SWP480B	480	450	224	≤10	170	17440	425	275	351	forty seven	12	90×45	22.5	265	16-31	38.21	1243
SWP550B	550	710	315	≤10	one hundred ninety	1905	492	320	402	50	twelve	100×45	22.five	290	16-31	61.00	1643
SWP600B	600	a thousand	500	≤10	210	2600	544	380	450	fifty five	fifteen	90×55	27.5	360	22-34	99.thirteen	2335
SWP640B	640	1250	630	≤10	230	2780	575	385	480	sixty	15	100×60	thirty	385	eighteen-38	170.21	27.twenty

♦Product Demonstrate

♦Other Items Checklist

Transmission Machinery Elements Identify	Model
Universal Coupling	WS, WSD, WSP
Cardan Shaft	SWC,SWP,SWZ
Tooth Coupling	CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK
Disc Coupling	JMI, JMIJ, JMII, JMIIJ
High Flexible Coupling	LM
Chain Coupling	GL
Jaw Coupling	LT
Grid Coupling	JS

♦Our Organization
Our company materials various types of products. Substantial quality and realistic price tag. We adhere to the basic principle of “good quality 1st, service 1st, constant improvement and innovation to meet the customers” for the administration and “zero defect, zero issues” as the quality goal. To ideal our service, we supply merchandise of very good top quality at a affordable price tag.

Welcome to customize items from our manufacturing unit and you should give your design and style drawings or make contact with us if you want other demands.

♦Our Solutions
one. Style Companies
Our design staff has expertise in Cardan shafts relating to solution layout and growth. If you have any wants for your new merchandise or desire to make even more improvements, we are here to provide our assist.

2. Product Solutions
uncooked materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

3. Samples Process
We could build the sample in accordance to your requirement and amend the sample continuously to fulfill your want.

4. Research & Development
We usually research the new wants of the marketplace and create new versions when there are new autos in the industry.

5. Quality Manage
Each action need to be a special take a look at by Specialist Employees according to the regular of ISO9001 and TS16949.

♦FAQ
Q 1: Are you a buying and selling firm or a producer?
A: We are a professional company specializing in manufacturing
different series of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the clients with personalized artworks in PDF or AI format.

Q 3:How long is your shipping time?
Generally, it is 20-30 days if the items are not in inventory. It is in accordance to amount.

Q 4: Do you offer samples? Is it totally free or added?
Indeed, we could offer you the sample but not for totally free. In fact, we have a very good cost basic principle, when you make the bulk buy the cost of the sample will be deducted.

Q 5: How prolonged is your warranty?
A: Our Warranty is twelve months beneath typical conditions.

Q 6: What is the MOQ?
A: Typically our MOQ is 1pcs.

Q 7: Do you have inspection techniques for coupling?
A:one hundred% self-inspection prior to packing.

Q 8: Can I have a visit to your manufacturing unit prior to the purchase?
A: Certain, welcome to go to our factory.

Q 9: What is actually your payment?
A:1) T/T. 2) L/C

♦Get in touch with Us

Net: huadingcoupling

Include: No.1 HangZhou Road,Chengnan park,HangZhou Metropolis,ZheJiang Province,China

US $74.85-149,700
/ Piece
| 1 Piece

(Min. Order)

###

Standard Or Nonstandard:	Standard
Shaft Hole:	as Your Requirement
Torque:	as Your Requirement
Bore Diameter:	as Your Requirement
Speed:	as Your Requirement
Structure:	Flexible

###

Customization:	Available \| Customized Request

###

Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Size(mm)										Rotary inertia kg·m²	Mass kg
Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	L	D1 js11	D2 H7	D3	E	E1	B×h	h1	L1	n-d	Rotary inertia kg·m²	Mass kg
SWP160B	160	16	8	≤10	50	585	140	95	114	15	4	20×12	6	85	6-13	0.14	44
SWP180B	180	20	10	≤10	60	640	155	105	121	15	4	24×14	7	95	6-15	0.23	54
SWP200B	200	31.5	16	≤10	70	730	175	125	17	17	5	28×16	8	110	8-15	0.36	75
SWP225B	225	40	20	≤10	76	830	196	135	152	20	5	32×18	9	130	8-17	0.61	108
SWP250B	250	63	31.5	≤10	80	860	218	150	168	25	5	40×25	12.5	135	8-19	0.98	138
SWP285B	285	90	45	≤10	100	1000	245	170	194	27	7	40×30	15	150	8-21	2.12	229
SWP315B	315	140	63	≤10	110	1120	280	185	219	32	7	40×30	15	170	10-23	3.80	309
SWP350B	350	180	90	≤10	120	1230	310	210	245	35	8	50×32	16	185	10-23	6.60	408
SWP390B	390	250	112	≤10	120	1310	345	235	273	40	8	70×36	18	205	10-25	10.50	539
SWP435B	435	355	160	≤10	150	1555	385	255	299	42	10	80×40	20	235	16-28	22.39	903
SWP480B	480	450	224	≤10	170	17440	425	275	351	47	12	90×45	22.5	265	16-31	38.21	1243
SWP550B	550	710	315	≤10	190	1905	492	320	402	50	12	100×45	22.5	290	16-31	61.00	1643
SWP600B	600	1000	500	≤10	210	2600	544	380	450	55	15	90×55	27.5	360	22-34	99.13	2335
SWP640B	640	1250	630	≤10	230	2780	575	385	480	60	15	100×60	30	385	18-38	170.21	27.20

###

Transmission Machinery Parts Name	Model
Universal Coupling	WS, WSD, WSP
Cardan Shaft	SWC,SWP,SWZ
Tooth Coupling	CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK
Disc Coupling	JMI, JMIJ, JMII, JMIIJ
High Flexible Coupling	LM
Chain Coupling	GL
Jaw Coupling	LT
Grid Coupling	JS

US $74.85-149,700
/ Piece
| 1 Piece

(Min. Order)

###

Standard Or Nonstandard:	Standard
Shaft Hole:	as Your Requirement
Torque:	as Your Requirement
Bore Diameter:	as Your Requirement
Speed:	as Your Requirement
Structure:	Flexible

###

Customization:	Available \| Customized Request

###

Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	Size(mm)										Rotary inertia kg·m²	Mass kg
Type	Tactical diameter D mm	Nominal torque Tn kN·m	Fatique torque Tf kN·m	Axis angle β (°)	Stretch length S mm	L	D1 js11	D2 H7	D3	E	E1	B×h	h1	L1	n-d	Rotary inertia kg·m²	Mass kg
SWP160B	160	16	8	≤10	50	585	140	95	114	15	4	20×12	6	85	6-13	0.14	44
SWP180B	180	20	10	≤10	60	640	155	105	121	15	4	24×14	7	95	6-15	0.23	54
SWP200B	200	31.5	16	≤10	70	730	175	125	17	17	5	28×16	8	110	8-15	0.36	75
SWP225B	225	40	20	≤10	76	830	196	135	152	20	5	32×18	9	130	8-17	0.61	108
SWP250B	250	63	31.5	≤10	80	860	218	150	168	25	5	40×25	12.5	135	8-19	0.98	138
SWP285B	285	90	45	≤10	100	1000	245	170	194	27	7	40×30	15	150	8-21	2.12	229
SWP315B	315	140	63	≤10	110	1120	280	185	219	32	7	40×30	15	170	10-23	3.80	309
SWP350B	350	180	90	≤10	120	1230	310	210	245	35	8	50×32	16	185	10-23	6.60	408
SWP390B	390	250	112	≤10	120	1310	345	235	273	40	8	70×36	18	205	10-25	10.50	539
SWP435B	435	355	160	≤10	150	1555	385	255	299	42	10	80×40	20	235	16-28	22.39	903
SWP480B	480	450	224	≤10	170	17440	425	275	351	47	12	90×45	22.5	265	16-31	38.21	1243
SWP550B	550	710	315	≤10	190	1905	492	320	402	50	12	100×45	22.5	290	16-31	61.00	1643
SWP600B	600	1000	500	≤10	210	2600	544	380	450	55	15	90×55	27.5	360	22-34	99.13	2335
SWP640B	640	1250	630	≤10	230	2780	575	385	480	60	15	100×60	30	385	18-38	170.21	27.20

###

Transmission Machinery Parts Name	Model
Universal Coupling	WS, WSD, WSP
Cardan Shaft	SWC,SWP,SWZ
Tooth Coupling	CL,CLZ,GCLD,GIICL, GICL,NGCL,GGCL,GCLK
Disc Coupling	JMI, JMIJ, JMII, JMIIJ
High Flexible Coupling	LM
Chain Coupling	GL
Jaw Coupling	LT
Grid Coupling	JS

PTO Shafts and PTO Shaft Shields

When choosing a PTO shaft, measuring the various pieces is an important aspect. Each piece must be measured in a specific way, with the shaft in a closed position. Measure the length between the outsides of the yokes. The closed length will help you determine the correct PTO series size for the horsepower of your tractor.

540 rpm

Shaft Collar A 540 RPM PTO Shaft will fit CZPT PTO models. These shafts are slightly indexed to allow for easy PTO drive hookups. These shafts will also work with 1000 RPM implements. They also feature a snap ring that will allow for quick and easy removal.
PTO shafts are commonly divided into two types: 1000 RPM and 540 RPM. The 540 RPM PTO shafts are smaller, with only six splines, while the 1000 RPM PTO shafts are larger. The 540 RPM version is used with implements that require less horsepower and are made for light-duty use.
The PTO shaft transfers power from the tractor’s engine to a PTO-driven implement. When operating at its recommended speed, the PTO shaft rotates at 540 rpm (9 times per second). The higher speed PTO shafts have more splines.

Safety chains

Safety chains for PTO shafts are an important safety feature to consider when operating a tractor. These chains are welded to the drive end of a tractor or implement. They are used to prevent the plastic shield from spinning on the PTO shaft. The chain’s reaction time is slower than the speed of the PTO shaft, which makes it important for safety.
When operating a tractor, it is important to follow the manufacturer’s instructions and keep the machine and equipment in a safe location. A poorly-guarded PTO can entrap ground personnel or cause a serious accident. Operator awareness is also important. It is important to avoid stepping over a revolving shaft, wearing loose clothing, or making repairs while the tractor is running. It is also important to follow the manufacturer’s instructions and use the PTO for its intended purpose.
The safety chains for PTO shafts must be properly connected and fully functional before each use. During a PTO operation, the PTO shaft may rotate as much as 1000 rpm, which is potentially deadly. In addition to safety chains, the tractor should have a clutch or torque limiter fitted on the implement end.
The PTO shaft must have a correct length for the machine. If it is a sliding metal PTO drive shaft, it is important to lubricate it according to manufacturer’s specifications. Lubrication is recommended after every eight hours of operation. Also, make sure that the button on the end of the PTO shaft moves freely. Hammering it into place can damage the guard and the shaft.
A PTO driveline hazard is one of the oldest farm machinery hazards. It refers to the PTO or Implement Input Connection. There are often protruding pins and bolts on the driveline, which can snag clothing.

Shield

Shaft Collar The PTO shaft shield is a protective piece that encloses a PTO shaft. These shields are usually plastic, but some are also made of metal. They are made to protect the PTO shaft from debris, which can cause premature wear and damage to the universal joints. A PTO shaft shield is not a permanent fixture, but can be easily removed for replacement or repair.
The PTO shaft shield should be checked periodically to ensure that it is in good condition. It should have no loose ends or loose bolts. Ensure that the shear bolts and pins are the right length and hardness for the PTO shaft. Additionally, the operator should wear snug clothing to avoid stepping on the PTO shaft while working.
The PTO shaft shield should fit snugly over the PTO shaft. If the PTO shaft is loose, it may be difficult to attach the safety shield. However, with a proper PTO shaft shield, the process should be quick and easy. A CZPT safety clip allows easy removal and prevents co-rotation between the inner driveshaft and the safety shield. The driveline safety shield from RPM Transmissions is made of CZPT, which is a rigid and durable material.
In addition, some machine drive shafts are lacking a shield. This can cause a safety hazard. Without a PTO shaft shield, an operator may accidentally touch the shaft and get injured. These guards prevent this danger by enclosing the shaft in a plastic or metal guard.
The PTO shaft shield is a crucial part of tractor safety. It helps protect the operator from accidental entanglement while operating the tractor. When the PTO shaft stub becomes separated, it can cause severe injuries and even fatalities. Thankfully, the industry has made tremendous progress in reducing the risks associated with PTO mishaps. Operators must make sure they maintain the shields and do not remove them if not in use.

Reverse rotation

Shaft Collar The PTO shaft reverse rotation mechanism prevents the main drive shaft from moving in a direction opposite to the direction of rotation of the driven shaft. The mechanism is compact, reducing the length of the rotation shaft. The mechanism includes two reversing members: first reversing member 151 rotates in a clockwise direction and second reversing member 153 rotates in a counterclockwise direction.
In a PTO shaft reverse rotation mechanism, a driven shaft is inserted into a hollow cylindrical body. It is rotatably positioned relative to the main driving shaft 112 and radially symmetrically around it. As a result, the driving and reverse-rotation mechanisms are symmetric.
One such PTO shaft reverse rotation mechanism has a main drive shaft and a driven shaft, and a plurality of transmission units coupled to it. The driven shaft and the transmission member rotate in tandem. The transmission units are arranged radially about the main driving member and the driven shaft. Alternatively, one of the reversing units may comprise the second reversing member and the first driving member.
China Double Flange Auto Transmission Cardan Shaft pto shaft parts
editor by czh 2022-12-14