China 2014 Hot Sale 40HP 4WD Tractor with Agricultural Equipment pto shaft adapter tractor supply

Merchandise Description

40Hp 4wd Tractor With Agricultural Gear

Solution attributes of HH404 40hp tractor
— F8+R4 gear change, all gears are arranged in order, excellent adaptability in all agriculture problems.
— 540/1000rpm, 760/1000rpm double velocity PTO techniques, high operation effectiveness.
— Closed paddy rice entrance push axle, substantial operation effectiveness and appropriate for paddy operation.
— Optional air brake can complete far more farm work and transportation operation.
— Strengthened PTO shaft, hello-reliability.
— Can install popular domestic engines like ZheJiang Yuchai, YTO Brands, effective and reputable.

Optional Units for HH404 40hp tractor
Enclosed fan cabin
Luxurious Cabin
Heater or AC
Entrance and Rear Ballast
Paddy tyre
Air brake
One particular or 2 group output valve
Swing drawbar
High stress hydraulic hitch
With Roll Above Safety Composition Method

40HP 4 wheel drive Farm Tractor

1: Superiority of HH404
A). Assembled with creeping shift, double stage clutch, dual-way hydraulic output and hydraulic steering, which is common on intercontinental industry.

B). With the traits of compact structure, mini size, sensible energy, numerous operate, straightforward procedure, reputable overall performance and environment guarded, it is a correct tractor for family members and farm for agriculture and gardening.

C). With entrance loader and again hoe, tractor can do numerous sort of work engineering

D). With the fluid driving on total framework, it has characteristics as compact framework and agile procedure, which leads it work freely in incommodious subject where huge device can not attain.

E). The functioning implements are connected with tractor in rapid linkage kind, and hydraulic pipes are linked by swift coupling, which are straightforward for assembly.

F). The tractor hydraulic technique affords electrical power to entrance loader, back again hoe and tractor raise equipments. Hydraulic oil tank is made according to the intercontinental regular, which is easy for upkeep.

40hp-55hp Series have each 2WD AND 4 wheel drive kind wheel farm tractor for dry and paddy subject and for transportation. It can be used for various farm functioning with many implements, this kind of as plough, harrow, harvest machine, flail mower, trailer etc.

1. ISO certificate

two. 4-wheel-push, a properly sealed from push axle

three. Non-servicing of battery

four. Geared up with famous motor, decrease oil intake, substantial torque reservoir, excellent commencing

five. Outstanding functioning with draft manage lever and position management lever, hydraulic steering technique.

6. Steamline form, compound panel

seven. ROPS, cover, enclosed cabin, multi-way hydraulic valve etc. Can be chosen according to operating request.

Remark:
The hp we can provide is 25-145hp, if you need 1 of them, please contact with us.

Technical parameter for 40hp 4wd tractor

Tractor Model  HH-404
Tractor Type 4X 4
Dimension(MM) LXWXH 3615×1750×2150
Wheelbase(MM) 1924
Clearance(MM) 325
Tread(MM) Front Wheel 1300
  Rear Wheel 1300 _ 1500(1300 normally)
Structural   Mass(KG) 2200
Theoretical Running Speed (KM/H) Front Gear ( 8  Gear):  2.sixty five-34.seventy eight
  Reverse Gear ( 4  Gear):  3.94-twelve.1
Power Engine Type
Rated Speed R/Min
Vertical, Water Cool, Four-stroke, Direct Injection Combustion /2300
Rated Power (KW) 29.four
Clutch Dry- T ype /Double-Performing
Gear Box F8+R4
Steering System Type Hydraulic  steering
Brake Wet Double Plate Disc Brake
Tyre Type Front Tyre eight.3-twenty    
  Rear Tyre 1 2.4 – 28     
Ballast weight (KG) Front  80
  Rear  60
PTO Type/
 Speed (r/min)
Rear  Semi- d etached Type  /
540/760  
Spline shaft size (mm) Φ 38×8 or Φ35×6 or Φ34.67×21
Hydraulic Lifting System Semi-separated  Type
Suspension Mechanism Type Rear Three-Point Suspension

Specialized Parameters

Creation Workshop

Certificate

Company Companions

FAQ

Q1. How to ship the Tractors?
A:    By container, bulk ship, RORO.

Q2. Do you have different horsepower tractors?
A:   Yes,we supply distinct model tractors and exported to many nations around the world.

Q3. What is your payment expression?
A: We normally accept T/T or L/C depends on the quantity. 
     T/T, deposit in advance, and equilibrium paid out prior to shipping and delivery from manufacturing unit.

This fall. Which product tractors do you supply?
A:  We offer all varieties of tractors these kinds of as walking tractors, wheel tractors etc,.

Q5. What is your phrases of supply?
A:    FOB, CIF.

Q6. How about your shipping time?
A:   Generally, it will take 35 times soon after receiving your advance payment. The certain shipping and delivery time depends on the things and the quantity of your order.

Q7. Do you test all your merchandise before supply?
A:   Yes, we have one hundred% check just before supply

Q8: What can you promise to your company spouse?
A:   Best cost with great good quality. We promise high quality and after sale provider to satisfy our business companions.

US $8,459
/ units
|
3 units

(Min. Order)

###

Type: Wheel Tractor
Usage: Farm Tractor
Certification: ISO, CE, CCC, ISO/TS16949
Drive Wheel: 4WD
Emission Standard: Euro II
Fuel: Gas / Diesel

###

Customization:

###

Tractor Model  HH-404
Tractor Type 4X 4
Dimension(MM) LXWXH 3615×1750×2150
Wheelbase(MM) 1924
Clearance(MM) 325
Tread(MM) Front Wheel 1300
  Rear Wheel 1300 _ 1500(1300 normally)
Structural   Mass(KG) 2200
Theoretical Running Speed (KM/H) Front Gear ( 8  Gear):  2.65-34.78
  Reverse Gear ( 4  Gear):  3.94-12.1
Power Engine Type
Rated Speed R/Min
Vertical, Water Cool, Four-stroke, Direct Injection Combustion /2300
Rated Power (KW) 29.4
Clutch Dry- T ype /Double-Acting
Gear Box F8+R4
Steering System Type Hydraulic  steering
Brake Wet Double Plate Disc Brake
Tyre Type Front Tyre 8.3-20    
  Rear Tyre 1 2.4 – 28     
Ballast weight (KG) Front  80
  Rear  60
PTO Type/
 Speed (r/min)
Rear  Semi- d etached Type  /
540/760  
Spline shaft size (mm) Φ 38×8 or Φ35×6 or Φ34.67×21
Hydraulic Lifting System Semi-separated  Type
Suspension Mechanism Type Rear Three-Point Suspension
US $8,459
/ units
|
3 units

(Min. Order)

###

Type: Wheel Tractor
Usage: Farm Tractor
Certification: ISO, CE, CCC, ISO/TS16949
Drive Wheel: 4WD
Emission Standard: Euro II
Fuel: Gas / Diesel

###

Customization:

###

Tractor Model  HH-404
Tractor Type 4X 4
Dimension(MM) LXWXH 3615×1750×2150
Wheelbase(MM) 1924
Clearance(MM) 325
Tread(MM) Front Wheel 1300
  Rear Wheel 1300 _ 1500(1300 normally)
Structural   Mass(KG) 2200
Theoretical Running Speed (KM/H) Front Gear ( 8  Gear):  2.65-34.78
  Reverse Gear ( 4  Gear):  3.94-12.1
Power Engine Type
Rated Speed R/Min
Vertical, Water Cool, Four-stroke, Direct Injection Combustion /2300
Rated Power (KW) 29.4
Clutch Dry- T ype /Double-Acting
Gear Box F8+R4
Steering System Type Hydraulic  steering
Brake Wet Double Plate Disc Brake
Tyre Type Front Tyre 8.3-20    
  Rear Tyre 1 2.4 – 28     
Ballast weight (KG) Front  80
  Rear  60
PTO Type/
 Speed (r/min)
Rear  Semi- d etached Type  /
540/760  
Spline shaft size (mm) Φ 38×8 or Φ35×6 or Φ34.67×21
Hydraulic Lifting System Semi-separated  Type
Suspension Mechanism Type Rear Three-Point Suspension

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

Shaft CollarA Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China 2014 Hot Sale 40HP 4WD Tractor with Agricultural Equipment     pto shaft adapter tractor supplyChina 2014 Hot Sale 40HP 4WD Tractor with Agricultural Equipment     pto shaft adapter tractor supply
editor by czh 2022-12-24